NSN 3110-01-186-2259 · NIIN 011862259 · FSC 3110
NO DASHES 3110011862259
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Application: G AND S SECTION AGM65D
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.1245 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 0.0936 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 0.1874 |
| AGAV | END ITEM IDENTIFICATION | G AND S SECTION AGM65D |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZC | LOAD DIRECTION | RADIAL |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0005 AND INCHES MAXIMUM RADIAL 0.0008 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.5 |
| FEAT | SPECIAL FEATURES | CAUTION SHALL BE TAKEN TO PREVENT CONTAMINATION OR SEPARATION OF MATCHED PAIRS |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-L-6085 |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | LUBRICATION OIL |
| MATT | MATERIAL | SEPARATOR STEEL UNS K44220 AND STEEL UNS K44315 |
| STYL | STYLE DESIGNATOR |