NSN 3441-01-510-0773 · NIIN 015100773 · FSC 3441
NO DASHES 3441015100773
In Stock
FORMING MACHINE,SHEET METAL,SLIP
Bending and Forming Machines
Application: FORMING MACHINE
Technical characteristics
16 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR OR TABLE |
| ABFF | FURNISHED ITEMS | POWER UNIT |
| ACDC | CURRENT TYPE | AC |
| AGAV | END ITEM IDENTIFICATION | FORMING MACHINE |
| ANCY | HORSEPOWER RATING | 0.750 |
| APHE | OPERATION METHOD | POWER |
| ATPZ | ROLL DIAMETER | INCHES NOMINAL 3.000 |
| AWZJ | POWER SOURCE | ELECTRIC MOTOR |
| CHRR | METAL THICKNESS ACCOMMODATED | 16 GAUGE |
| CHRS | WORKING WIDTH | INCHES NOMINAL 29.000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | HEAVY DUTY POWERED SLIP ROLL |
| ELEC | VOLTAGE IN VOLTS | 230.0 AND 460.0 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | GEAR RATIO 4:1;WIRE GROOVES 3/8,1/2,5/8 INCHES;MINIMUM FORMING RADIUS 1-1/2 INCH;MAXIMUM FORMING LENGTH 49 INCHES;TOGGLE-ACTION CONTROLLED,SHROUDED FOOT PEDAL FOR INSTANT FORWARD/REVERSE ACTION |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| SUPP | SUPPLEMENTARY FEATURES | 3 ROLLS,FULL LENGTH STARTING GROOVES IN REAR ARE GEAR DRIVEN,ROOLS & GEARS MOUNTED IN HARDENED BRONZE BUSHINGS;LARGE ROLL ADJUSTING SCREWS;SCALES FOR SPEEDING REPEAT SETUP;4FOOT-16 GAUGE POWERED ROLL;WIDE CLEARANCE TOP ROLL LATCH & END MOUNTED HANDLE |