NSN 3110-01-220-6581 · NIIN 012206581 · FSC 3110
NO DASHES 3110012206581
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.3750 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.0625 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 1.5000 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYK | SHIELD QUANTITY | 2 |
| AGZC | LOAD DIRECTION | ANGULAR |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0005 AND INCHES MAXIMUM RADIAL 0.0008 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 10.0 AND POUNDS MAXIMUM 20.0 |
| CTHY | CONTACT ANGLE | DEGREES MINIMUM 16.0 AND DEGREES MAXIMUM 23.0 |
| FEAT | SPECIAL FEATURES | VACUUM IMPREGNATE AND CENTRIFUGE TO REMOVE EXCESS LUBRICANT |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE AD-S150019,FSC- 83086 |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | SHIELD STEEL COMP 440C |
| MATT | MATERIAL | RETAINER PLASTIC PHENOLIC |
| MATT | MATERIAL | LUBRICATION OIL |
| STYL | STYLE DESIGNATOR |