NSN 3110-01-035-3765 · NIIN 010353765 · FSC 3110
NO DASHES 3110010353765
In Stock
BEARING,BALL,ANNULAR
Bearings, Antifriction, Unmounted
Application: LGM30 F/G
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.5604 AND INCHES MAXIMUM 0.5624 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.59075 AND INCHES MAXIMUM 0.59095 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 1.12435 AND INCHES MAXIMUM 1.12455 |
| AGAV | END ITEM IDENTIFICATION | LGM30 F/G |
| AGYE | SURFACE FINISH | GROUND |
| AGYK | SHIELD QUANTITY | 1 |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZK | INTERNAL FIT-UP CONTACT ANGULAR DIRECTION | OUTWARD CONVERGENT |
| AKVV | INTERNAL CLEARANCE | INCHES NOMINAL RADIAL 0.0012 |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7P |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 6.0 AND POUNDS MAXIMUM 11.0 |
| CTHY | CONTACT ANGLE | DEGREES MINIMUM 19.0 AND DEGREES MAXIMUM 31.0 |
| FEAT | SPECIAL FEATURES | BALL SEPARATOR MATERIAL SHALL BE DELRIN 100 OR DELRIN 500 (E.I. DUPONT)OR EQUIVALENT; SHIELD MATERIAL SHALL BE CORROSION-RESISTANT STEEL;PART OF A DRIVE ASSY. USED ON PIGA |
| LBMA | LUBRICATION MATERIAL | OIL |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING ASSN STD SINGLE MATERIAL RESPONSE A-S 5630 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STYL | STYLE DESIGNATOR |