NSN 2010-00-541-0110 · NIIN 005410110 · FSC 2010
NO DASHES 2010005410110
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CPTS | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES COVERED |
| CPTT | FORWARD END TAPER MAJOR DIAMETER | INCHES NOMINAL 13.500 |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| APZX | PROTECTIVE COVERING TYPE | RUBBER |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 13.625 |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 6.500 |
| BPJZ | USAGE LOCATION | CENTER |
| CPHM | FORWARD END DESIGN | TAPERED |
| CPTG | FORWARD BEARING SLEEVE LENGTH | FEET NOMINAL 4.583 |
| CPTC | AFTER END DESIGN | TAPERED |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | INCHES NOMINAL 13.625 |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| AKYN | FURNISHED ITEMS AND QUANTITY | PROPELLER NUT 1; PROPELLER KEY,2 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 12.500 |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.562 |
| ABRV | KEYWAY DEPTH | INCHES NOMINAL 0.750 |
| NMBR | QUANTITY | 2 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SPECIAL,FEATURES |
| CQCF | CONSTRUCTION | HOLLOW |
| CQRN | THREAD QUANTITY | PER INCH 4 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 1.000 |
| CTMS | FORWARD END TAPER | PER FOOT IN INCHES NOMINAL 0.125 |
| FEAT | SPECIAL FEATURES | SHAFT IS COLD ROLLED IN PROPELLER TAPER AREA 9 FT 4-3/4 IN. LG STARTING 2 IN. FORWARD OF THE AFTER TAPER AND EXTENDING 12 IN. BEYOND FORWARD END OF AFTER SLEEVE |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-890,FORGED |
| ABND | TAPER LENGTH | FEET NOMINAL 1.959 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 2.481 |
| CPNC | FORWARD END TAPER LENGTH | FEET NOMINAL 1.258 |
| AEJZ | DEPTH | INCHES NOMINAL 1.000 |
| AEVE | KEYWAY QUANTITY | 3 AND 1 |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 3.500 AND INCHES MAXIMUM 7.000 |
| AAZR | MAJOR DIAMETER | INCHES NOMINAL 8.000 |
| ABET | THREAD LENGTH | INCHES 7.625 |
| ABGL | WIDTH | INCHES MINIMUM 2.375 AND INCHES MAXIMUM 2.438 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 12.533 |