NSN 5340-00-847-9350 · NIIN 008479350 · FSC 5340
NO DASHES 5340008479350
In Stock
COVER,ACCESS
Hardware, Commercial
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADPR | BODY THICKNESS | INCHES NOMINAL 0.064 |
| ADQB | SECURING DEVICE TYPE | TURNLOCK FASTENER |
| ADNW | HOLE QUANTITY ALONG WIDTH | 4 |
| ADQK | MOUNTING OPENING SHAPE STYLE | |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | INCHES NOMINAL 5.366 |
| ABGL | WIDTH | INCHES MINIMUM 5.730 AND INCHES MAXIMUM 5.750 |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | INCHES MINIMUM 2.995 AND INCHES MAXIMUM 3.005 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| ADPC | DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH | INCHES MINIMUM 0.547 AND INCHES MAXIMUM 0.562 |
| ABMW | PERIPHERAL SHAPE STYLE | |
| ABRY | LENGTH | INCHES MINIMUM 6.730 AND INCHES MAXIMUM 6.750 |
| ADNV | HOLE QUANTITY ALONG LENGTH | 2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 11 |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-A-8625 |
| ADPD | DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH | INCHES MINIMUM 0.192 AND INCHES MAXIMUM 0.202 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.257 AND INCHES MAXIMUM 0.259 |