NSN 2010-00-814-8610 · NIIN 008148610 · FSC 2010
NO DASHES 2010008148610
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKYN | FURNISHED ITEMS AND QUANTITY | PROPELLER NUT,1; PROPELLER KEY,2 |
| ABRV | KEYWAY DEPTH | INCHES NOMINAL 1.317 |
| AEJZ | DEPTH | INCHES NOMINAL 1.625 |
| APQB | UNIT TYPE | PROPELLER SHAFT SECTION |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | ELRN DWG NO. SSB/N/608-203-1955601 AND SSB/N/608-203-1955602,W/O EPOXY RESIN INSERT,COUPLING,AND COUPLING KEYS; AS DIFFERENTIATED BY EXTRA LONG REFERENCE NUMBER |
| CQCF | CONSTRUCTION | HOLLOW |
| APZX | PROTECTIVE COVERING TYPE | RUBBER |
| BPJZ | USAGE LOCATION | CENTER |
| CPHM | FORWARD END DESIGN | TAPERED |
| CPNC | FORWARD END TAPER LENGTH | FEET NOMINAL 1.167 |
| CPTC | AFTER END DESIGN | TAPERED |
| CPTF | FORWARD BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 17.371 AND INCHES MAXIMUM 17.375 |
| CPTG | FORWARD BEARING SLEEVE LENGTH | FEET NOMINAL 6.583 |
| CPTH | AFTER BEARING SLEEVE OUTSIDE DIAMETER | INCHES MINIMUM 17.371 AND INCHES MAXIMUM 17.375 |
| AEVE | KEYWAY QUANTITY | 3 AND 1 |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 1.812 AND INCHES MAXIMUM 1.813 |
| AARX | INSIDE DIAMETER | INCHES MINIMUM 4.500 AND INCHES MAXIMUM 9.000 |
| AAZR | MAJOR DIAMETER | INCHES NOMINAL 10.000 |
| ABET | THREAD LENGTH | INCHES 9.500 |
| ABGL | WIDTH | INCHES MINIMUM 2.750 AND INCHES MAXIMUM 2.751 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 39.786 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 16.000 AND INCHES MAXIMUM 16.006 |
| ABND | TAPER LENGTH | FEET NOMINAL 3.000 |
| ABQB | TAPER MAJOR DIAMETER | INCHES NOMINAL 16.000 |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-890, CLASS AN |
| NMBR | QUANTITY | 2 |
| CQRN | THREAD QUANTITY | PER INCH 4 |
| CTKF | TAPER | PER FOOT IN INCHES NOMINAL 1.000 |
| CTMS | FORWARD END TAPER | PER FOOT IN INCHES NOMINAL 0.125 |
| ELRN | EXTRA LONG REFERENCE NUMBER | SSBN608-203-1955601ANDSSBN608-203-1955602,W/O EPOXY RESIN INSERT,COUPLING, AND COUPLING KEYS |
| CPTS | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES COVERED |
| CPTP | AFTER BEARING SLEEVE LENGTH | FEET NOMINAL 6.250 |
| CPTT | FORWARD END TAPER MAJOR DIAMETER | INCHES NOMINAL 17.250 |