NSN 5306-01-625-7350 · NIIN 016257350 · FSC 5306
NO DASHES 5306016257350
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: F-15SA
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 0.376 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| AAVA | POINT DIAMETER | INCHES NOMINAL 0.1900 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | POINT INCHES MINIMUM 0.111 AND INCHES MAXIMUM 0.121 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, CLOSE TOLERANCE, DOUBLE HEX HEAD |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.140 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.127 AND INCHES MAXIMUM 1.174 |
| AASK | HEAD STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED STD SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.331 |
| AGAV | END ITEM IDENTIFICATION | F-15SA |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.1900 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.875 |
| AAJD | THREAD CLASS | R3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CMLP | THREAD QUANTITY PER INCH | N32 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | RING INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.075 |
| ABQJ | POINT STYLE |