NSN 5306-01-727-5682 · NIIN 017275682 · FSC 5306
NO DASHES 5306017275682
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: F-15EX
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.8885 AND INCHES MAXIMUM 0.9355 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.4275 AND INCHES MAXIMUM 0.4475 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, CLOSE TOLERANCE - DOUBLE HEX HEAD, CRES (125 KSI FSU) |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S-QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASK | HEAD STYLE | |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.076 AND INCHES MAXIMUM 0.081 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.441 AND INCHES MAXIMUM 0.508 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.177 AND INCHES MAXIMUM 0.197 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.492 AND INCHES MAXIMUM 0.502 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AGAV | END ITEM IDENTIFICATION | F-15EX |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |