NSN 5306-01-486-3653 · NIIN 014863653 · FSC 5306
NO DASHES 5306014863653
In Stock
BOLT,SHEAR
Bolts
Application: F-15
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.614 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.677 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.378 AND INCHES MAXIMUM 0.398 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.429 AND INCHES MAXIMUM 0.449 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.639 AND INCHES MAXIMUM 0.649 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.081 AND INCHES MAXIMUM 0.101 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| AGAV | END ITEM IDENTIFICATION | F-15 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.063 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 1.188 AND INCHES MAXIMUM 1.228 |
| FEAT | SPECIAL FEATURES | ITEM IS NOT CSI BUT HAS CRITICAL FEATURES SUCH AS HEAT TREATMENT, SURFACE FINISH, OR MATERIAL TYPE AND SPECIAL INSP. REQ.S SUCH AS MAGNETIC PARTICLE INSP. OR FLUORESCENT PENETRANT INSPECTION |
| MATT | MATERIAL | OVERALL STEEL COMP 8660H |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNF |