NSN 5306-01-209-9297 · NIIN 012099297 · FSC 5306
NO DASHES 5306012099297
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.027 AND INCHES MAXIMUM 1.077 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.662 AND INCHES MAXIMUM 2.692 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.701 AND INCHES MAXIMUM 0.721 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.804 AND INCHES MAXIMUM 0.824 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.220 AND INCHES MAXIMUM 1.230 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.168 AND INCHES MAXIMUM 0.188 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.7797 AND INCHES MAXIMUM 0.7802 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.635 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.050 AND INCHES MAXIMUM 0.060 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.750 |
| ASXK | HOLE QUANTITY | 4 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRHC | HOLE CONFIGURATION STYLE | |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |