NSN 5305-01-685-8598 · NIIN 016858598 · FSC 5305
NO DASHES 5305016858598
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F/A-18 A-D
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | F/A-18 A-D |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW-CLOSE TOLERANCE,100 DEG C'SUNK,DOVETAIL SLOT HEAD,SHORT THREAD,CRES(125 KSI FSU) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE MATERIAL RESPONSE A-S 5629 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.0 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| AASK | HEAD STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD SINGLE TREATMENT RESPONSE A-S 2700, -ETHOD 1 |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.391 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.391 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-714 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3750 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQJ | POINT STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.752 AND INCHES MAXIMUM 0.762 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 100.0 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |