NSN 5305-01-032-7045 · NIIN 010327045 · FSC 5305
NO DASHES 5305010327045
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.366 AND INCHES MAXIMUM 0.416 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.314 AND INCHES MAXIMUM 2.344 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.752 AND INCHES MAXIMUM 0.762 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.928 AND INCHES MAXIMUM 1.948 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 0.113 AND INCHES MAXIMUM 0.123 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112,-CDONNEL DOUGLAS COR |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |