NSN 5320-01-714-2012 · NIIN 017142012 · FSC 5320
NO DASHES 5320017142012
In Stock
PIN-RIVET
Rivets
Application: EA-18G
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0806 |
| AASU | HEAD HEIGHT | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.0785 AND INCHES MAXIMUM 0.0805 |
| AGAV | END ITEM IDENTIFICATION | EA-18G |
| ANEE | GRIP LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES NOMINAL 1.1875 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASK | HEAD STYLE | |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AAZE | SHANK DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| AAZF | SHANK STYLE | |
| AAZG | HEAD MAJOR DIAMETER | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 0.3765 AND INCHES MAXIMUM 0.3813 |
| AAZU | TIP DIAMETER | INCHES MINIMUM 0.1810 AND INCHES MAXIMUM 0.1840 |
| ABAJ | LUBRICATION | LOCATION NOT OTHERWISE SPECIFIED SOLID FILM AND CETYL ALCOHOL |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, RIVET, THREADED-TENSION, 100 DEGREE C'SUNK HEAD, HEX |
| AAJD | THREAD CLASS | 3A |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 4928 OR ASSN STD SINGLE MATERIAL RESPONSE A-S 4967 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | LOCATION NOT OTHERWISE SPECIFIED INCHES MINIMUM 1.5025 AND INCHES MAXIMUM 1.5225 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.1900 |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |