NSN 5320-01-719-8230 · NIIN 017198230 · FSC 5320
NO DASHES 5320017198230
In Stock
PIN-RIVET
Rivets
Application: F-15EX
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.565 AND INCHES MAXIMUM 0.585 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-761 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE A-S 5629 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.064 AND INCHES MAXIMUM 0.074 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0806 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.1890 AND INCHES MAXIMUM 0.1895 |
| AAZF | SHANK STYLE | |
| AGAV | END ITEM IDENTIFICATION | F-15EX |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.1900 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,RIVET,THREADED,TENSION,PROTRUDING HEAD,HEX POINT DRIVE |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.357 AND INCHES MAXIMUM 0.377 |
| ABAJ | LUBRICATION | CETYL ALCOHOL |
| AAJD | THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S 2700,-ETHOD 1 OR 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |