NSN 5320-01-727-3717 · NIIN 017273717 · FSC 5320
NO DASHES 5320017273717
In Stock
PIN-RIVET
Rivets
Application: EA-18G
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASK | HEAD STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-RIVET,THREADED,TENSION,100 DEGREE C'SUNK HEAD,HEX POINT DRIVE,0.0156 OVERSIZE,CRES (125 KSI FSU) |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S5629 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.60 AND INCHES MAXIMUM 0.62 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 125000 |
| AAZG | HEAD MAJOR DIAMETER | INCHES MINIMUM 0.3765 AND INCHES MAXIMUM 0.3813 |
| ABAJ | LUBRICATION | DRY FILM AND SOLID FILM AND CETYL ALCOHOL |
| AGAV | END ITEM IDENTIFICATION | EA-18G |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.245 AND INCHES MAXIMUM 0.255 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-813 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| AAZF | SHANK STYLE | |
| CRSQ | COUNTERSINK ANGLE | DEGREES NOMINAL 100.0 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.1900 |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE TREATMENT RESPONSE A-S2700 -ETHOD 1 OR 2 |
| AAZE | SHANK DIAMETER | INCHES MINIMUM 0.2021 AND INCHES MAXIMUM 0.2026 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.0791 AND INCHES MAXIMUM 0.0806 |