NSN 5340-01-067-5212 · NIIN 010675212 · FSC 5340
NO DASHES 5340010675212
In Stock
BRACKET,ANGLE
Hardware, Commercial
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ACHY | MOUNTING HOLE TYPE | PLAIN |
| ADLK | FIRST LEG LENGTH | INCHES NOMINAL 0.750 |
| ADLL | SECOND LEG LENGTH | INCHES NOMINAL 0.800 |
| AHLF | SECOND LEG WIDTH | INCHES NOMINAL 1.300 |
| AHLG | SECOND LEG CORNER RADIUS | INCHES NOMINAL 0.300 |
| AHLK | FIRST LEG HOLE DIAMETER | INCHES MINIMUM 0.129 AND INCHES MAXIMUM 0.134 |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.550 |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.300 |
| AHLZ | SECOND LEG SLOT LENGTH | INCHES NOMINAL 0.499 |
| AHMA | SECOND LEG SLOT WIDTH | INCHES MINIMUM 0.224 AND INCHES MAXIMUM 0.234 |
| AHPW | FIRST LEG THICKNESS | INCHES NOMINAL 0.071 |
| AHPX | SECOND LEG THICKNESS | INCHES NOMINAL 0.071 |
| AHQN | FIRST LEG WIDTH | INCHES NOMINAL 1.000 |
| AHQP | FIRST LEG CORNER RADIUS | INCHES NOMINAL 0.250 |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | INCHES NOMINAL 0.500 |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | INCHES NOMINAL 0.250 |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | INCHES NOMINAL 0.250 |
| AJZU | FIRST LEG STYLE | |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | |
| AKBU | SECOND LEG STYLE | |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| CSSQ | FIRST LEG ANGLE | DEGREES NOMINAL 90.0 |
| FEAT | SPECIAL FEATURES | RIGHT HAND AND CRES CLIP NUT INCLUDED |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC SINGLE MATERIAL RESPONSE QQ-A-250 TO 5,T72 OR T61 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | CHROMATE AND PRIMER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE TREATMENT RESPONSE -IL-C-5541 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 011200355. An older drawing citing one of those numbers resolves here.