NSN 3416-01-475-1178 · NIIN 014751178 · FSC 3416
NO DASHES 3416014751178
In Stock
LATHE,ENGINE
Lathes
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAXX | MOUNTING TYPE | FLOOR |
| ACDC | CURRENT TYPE | AC |
| ADQR | CENTER TO CENTER DISTANCE | INCHES NOMINAL 40.000 |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | HEADSTOCK W/TWO SPEED RANGE (20-400RPM LOW RANGE) AND (400-2500RPM HIGH RANGE)1EA;LED DISPLAY INDICATOR 1EA; |
| APGF | DESIGN TYPE | SCREW |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 5.000 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTSZ | SPINDLE SPEED QUANTITY | 2 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 20.0 TO 400.0 |
| BTTD | RATED SWING | INCHES NOMINAL 14.000 |
| BTTF | ACTUAL SWING OVER BED | INCHES NOMINAL 14.812 |
| BTTG | SWING OVER CROSS SLIDE | INCHES NOMINAL 8.375 |
| BTWB | THREAD CHANGE QUANTITY | 45 |
| BTWG | ACTUAL SWING OVER CLOSED GAP | INCHES NOMINAL 21.000 |
| BTWL | HEADSTOCK DRIVE TYPE | GEARED HEAD |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | INCHES NOMINAL 2.062 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTZR | THREAD QUANTITY RANGE | PER INCH 2.0 TO 72.0 |
| ELEC | VOLTAGE IN VOLTS | 230.0 |
| FAAZ | PHASE | THREE |
| FEAT | SPECIAL FEATURES | COOLANT SYSTEM W/115.0VAC MOTOR AND CONTROLS |
| FREQ | FREQUENCY IN HERTZ | 60.0 |