NSN 5930-00-581-6037 · NIIN 005816037 · FSC 5930
NO DASHES 5930005816037
In Stock
SWITCH,ROTARY
Switches
Application: TICONDEROGA CLASS CG
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AFCQ | KNOB MANUFACTURER CODE | 80064 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | SINGLE MOUNTING FACILITY INCHES NOMINAL 0.531 |
| CRSJ | SHAFT TYPE | SINGLE ACTUATOR RECTANGULAR/SQUARE, THREADED HOLE |
| CRTY | SQUARE SHAFT SIZE | SINGLE ACTUATOR INCHES NOMINAL 0.248 |
| CSCF | TERMINAL TYPE | TAB W/SCREW |
| CSHW | CONTACT SWITCHING ACTION | EACH SECTION FRONT BREAKS BEFORE MAKES |
| CSLC | SWITCH ACTUATOR POSITIONING INCREMENT | SINGLE ACTUATOR DEGREES 45.0 |
| AFCY | KNOB MANUFACTURER PART NUMBER | 9000S6202-73075PC1 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 17.000 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 6.312 |
| AFBH | INDIVIDUAL SECTION QUANTITY | 10 |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | SINGLE MOUNTING FACILITY INCHES NOMINAL 7.875 |
| AFDV | LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | SINGLE MOUNTING FACILITY INCHES NOMINAL 4.125 |
| AGAV | END ITEM IDENTIFICATION | TICONDEROGA CLASS CG |
| AJZE | SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| AXGY | MOUNTING METHOD | SINGLE MOUNTING FACILITY BRACKET(S) |
| CBBL | FEATURES PROVIDED | ACTUATOR KNOB AND METALLIC ENCLOSURE |
| CQMK | CONTACT VOLTAGE RATING IN VOLTS | 125.0 |
| CQYJ | MOUNTING FACILITY PATTERN | SINGLE MOUNTING FACILITY FOUR POSITION RECTANGULAR |
| CRJH | SWITCH ACTUATOR INDEXING POSITION QUANTITY | 8 |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | STYLE 2JRBB |
| ABXF | SHAFT LENGTH | SINGLE ACTUATOR INCHES NOMINAL 1.094 |
| CTDN | SWITCH ACTUATOR STOP DEVICE TYPE | SINGLE ACTUATOR ADJUSTABLE STOP |
| CTHF | CONTACT LOAD CURRENT RATING | AC AT SEA LEVEL AMPERES RESISTIVE LOAD 10.0 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 80064-9S5564L |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WATERTIGHT |