NSN 3130-01-295-4087 · NIIN 012954087 · FSC 3130
NO DASHES 3130012954087
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABGC | SLOT WIDTH | INCHES NOMINAL 0.875 |
| ABGD | SLOT LENGTH | INCHES NOMINAL 1.375 |
| ABGF | GROOVE WIDTH | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.750 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.0000 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 3.562 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 0.718 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 3.125 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.125 |
| AKRF | SEAL TYPE | CONTACT AND LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES NOMINAL 2.188 |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 95.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | DIRECT |
| CWHS | DISTANCE BETWEEN GROOVES | INCHES MINIMUM 2.620 AND INCHES MAXIMUM 2.630 |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | BEARING STEEL |
| MATT | MATERIAL | HOUSING IRON |
| MATT | MATERIAL | SEAL PLASTIC POLYAMIDE NYLON |
| STYL | STYLE DESIGNATOR |