NSN 3020-00-734-6778 · NIIN 007346778 · FSC 3020
NO DASHES 3020007346778
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJLA | TEETH QUANTITY | 40 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | SECOND END INCHES 0.234 |
| MATT | MATERIAL | OVERALL STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-624 |
| STYL | STYLE DESIGNATOR | |
| CWNH | TOOTH FORM | STANDARD |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.281 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 3.437 |
| CWPP | PRESSURE ANGLE | DEGREES 17.5000 |
| CWPZ | HELIX ANGLE | DEGREES 26.2053 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.844 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 7.729 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 7.4286 |
| CWNM | TOOTH DIRECTION | RIGHT |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 2.622 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.375 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.530 |
| CWTR | HUB STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 59.0 AND ROCKWELL C MAXIMUM 62.0 |
| AAQL | BODY STYLE |
Supersedes
This item replaces cancelled NIIN 003301289. An older drawing citing one of those numbers resolves here.