NSN 5340-01-102-7677 · NIIN 011027677 · FSC 5340
NO DASHES 5340011027677
In Stock
CLAMP,LOOP
Hardware, Commercial
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAAN | INTEGRAL NUT TYPE AND QUANTITY | EQUAL LENGTH TONGUES SELF-LOCKING 1 |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT AND OIL RESISTANT AND WEATHER RESISTANT |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.500 |
| ABPX | MATERIAL THICKNESS | INCHES MINIMUM 0.036 AND INCHES MAXIMUM 0.044 |
| AKZC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES | INCHES NOMINAL 1.250 |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | INCHES NOMINAL 0.850 |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | INCHES NOMINAL 1.220 |
| BZTN | LOOP INSIDE DIAMETER | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.640 |
| BZTQ | LUG HOLE DIAMETER | INCHES NOMINAL 0.204 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQJX | NOMINAL THREAD SIZE | INCHES 0.190 |
| MATT | MATERIAL | BAND STEEL CORROSION RESISTING |
| MATT | MATERIAL | CUSHION RUBBER CHLOROPRENE CLASS CR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | CUSHION ASSN STD SINGLE MATERIAL RESPONSE A-S 3209 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BAND MIL SPEC SINGLE MATERIAL RESPONSE -IL-S-6721,CO- TI 321 |
| SFTT | SURFACE TREATMENT | BAND PASSIVATE |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 007972621. An older drawing citing one of those numbers resolves here.