NSN 5910-01-252-8148 · NIIN 012528148 · FSC 5910
NO DASHES 5910012528148
In Stock
CAPACITOR,FIXED,ELECTROLYTIC
Capacitors
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.500 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.255 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.393 |
| AEBS | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | INCHES NOMINAL 0.200 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.016 |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| AECE | ANODE TYPE | SOLID |
| AECN | IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 0.6 |
| AECQ | ELECTRICAL POLARIZATION | POLARIZED |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 47.000 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 6.3 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 10.00 |
| CWNJ | CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 8.000 |
| CWQH | DC LEAKAGE AT REFERENCE TEMP | MICROAMPERES 3.000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| MATT | MATERIAL | CASE PLASTIC |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
Supersedes
This item replaces cancelled NIIN 010512486. An older drawing citing one of those numbers resolves here.