NSN 5990-01-311-3710 · NIIN 013113710 · FSC 5990
NO DASHES 5990013113710
In Stock
SYNCHRO,DIFFERENTIAL TRANSMITTER
Synchros and Resolvers
Technical characteristics
46 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES NOMINAL 3.3340 |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.6300 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES NOMINAL 3.3700 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.3750 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 6.0500 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 3.6230 AND INCHES MAXIMUM 3.6250 |
| ABKU | FLANGE THICKNESS | INCHES MINIMUM 0.2460 AND INCHES MAXIMUM 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 3.3900 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.7850 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2498 AND INCHES MAXIMUM 0.2500 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7700 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGRS | DISTANCE BETWEEN FLANGES | INCHES NOMINAL 1.8120 |
| AJSL | BODY SIZE | 37 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 550.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 4.25 |
| AJSS | FREQUENCY IN HERTZ | MINIMUM 50.0 AND MAXIMUM 60.0 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 14.60 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 10.50 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 6.000 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -18.0 TO 18.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES MAXIMUM 0.50 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MINIMUM 0.300 |
| AJVW | ALIGNMENT HOLE QUANTITY | 5 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0010 |
| AJWH | SHAFT END PLAY | INCHES MINIMUM 0.0010 AND INCHES MAXIMUM 0.0050 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0200 AND INCHES MAXIMUM 0.0400 |
| AJWW | AFT OF SECOND FLANGE DIAMETER | INCHES MAXIMUM 3.3750 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 3.7680 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | ALUMINUM |
| CQTM | TERMINAL LOCATION | REAR |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3020 AND INCHES MAXIMUM 0.3220 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, THREADED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.5000 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.000 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 3.0000 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 48.0 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 48.0 |
| FEAT | SPECIAL FEATURES | SHAFT IS ALSO SLOTTED,0.032 IN. WIDE BY 0.047 IN. DEEP;SHAFT RADIAL PLAYTEST POINT JAA0.125 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |