NSN 3020-00-528-7124 · NIIN 005287124 · FSC 3020
NO DASHES 3020005287124
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWNM | TOOTH DIRECTION | LEFT |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | FIRST END INCHES 0.125 |
| AAQL | BODY STYLE | |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 2.6960 |
| CWSR | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | BOTH ENDS INCHES 1.008 |
| CWTR | HUB STYLE DESIGNATOR | |
| ANTP | BORE STYLE | |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| AJLA | TEETH QUANTITY | 27 |
| CWPZ | HELIX ANGLE | DEGREES 33.5500 |
| CWNH | TOOTH FORM | STANDARD |
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.375 |
| MATT | MATERIAL | OVERALL STEEL |
| CWRM | FACE NOMINAL WIDTH | INCHES 1.250 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.748 |
| CWSN | KEYWAY NOMINAL WIDTH | BOTH ENDS INCHES 0.252 |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.438 |
| FEAT | SPECIAL FEATURES | 0.141 IN. 45 DEG CHAMFER ON 1ST END OF BORE,LETTER X STAMPED ON CENTER OF TOOTH 27 DEG 21 MIN CCW FROM CENTER LINE OF KEYWAY ON 1ST END |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 2.850 |
| STYL | STYLE DESIGNATOR |
Supersedes
This item replaces cancelled NIIN 003544255. An older drawing citing one of those numbers resolves here.