NSN 2010-00-932-7324 · NIIN 009327324 · FSC 2010
NO DASHES 2010009327324
In Stock
SHAFT,PROPULSION,SHIP
Ship and Boat Propulsion Components
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMZ | DIAMETER | INCHES NOMINAL 3.000 |
| CPNJ | FORWARD END THREAD LENGTH | INCHES 3.6875 |
| CPTC | AFTER END DESIGN | STRAIGHT |
| CPTT | FORWARD END TAPER MAJOR DIAMETER | INCHES NOMINAL 3.000 |
| ABGL | WIDTH | INCHES MINIMUM 0.748 AND INCHES MAXIMUM 0.750 |
| ABHP | OVERALL LENGTH | FEET NOMINAL 13.000 |
| ABKV | OUTSIDE DIAMETER | INCHES MINIMUM 3.000 AND INCHES MAXIMUM 3.002 |
| CPHM | FORWARD END DESIGN | TAPERED |
| CPNC | FORWARD END TAPER LENGTH | FEET NOMINAL 0.719 |
| AEVE | KEYWAY QUANTITY | 1 |
| AGYE | SURFACE FINISH | SMOOTH MACHINED |
| AKYN | FURNISHED ITEMS AND QUANTITY | JAM NUT,1,PROPELLER NUT,1 |
| APQB | UNIT TYPE | LINE SHAFT SECTION NO.1 |
| MATT | MATERIAL | COPPER ALLOY 464 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASSN STD SINGLE MATERIAL RESPONSE AST- B21-66A,NO. 464,HOT ROLLED |
| NMBR | QUANTITY | 1 |
| AEJZ | DEPTH | INCHES MINIMUM 0.311 AND INCHES MAXIMUM 0.314 |
| CPNH | FORWARD END THREAD QUANTITY | PER INCH 4-1 TO 2 |
| CQCF | CONSTRUCTION | SOLID |
| CTMS | FORWARD END TAPER | PER FOOT IN INCHES MINIMUM 2.4600 AND PER FOOT IN INCHES MAXIMUM 2.4620 |
| CPNG | FORWARD END MAJOR DIAMETER | INCHES NOMINAL 2.250 |
| ABRR | KEYWAY WIDTH | INCHES MINIMUM 0.748 AND INCHES MAXIMUM 0.750 |
| ABRV | KEYWAY DEPTH | INCHES MINIMUM 0.311 AND INCHES MAXIMUM 0.314 |
Supersedes
This item replaces cancelled NIINs 005298252 · 008461648. An older drawing citing one of those numbers resolves here.