NSN 5910-00-465-0312 · NIIN 004650312 · FSC 5910
NO DASHES 5910004650312
In Stock
CAPACITOR,FIXED,ELECTROLYTIC
Capacitors
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWSZ | CASE INSULATION MATERIAL | PLASTIC |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 1.500 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.289 |
| AARF | MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR | N-3 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-C-39003 |
| CQLH | DC LEAKAGE AT MAXIMUM OPERATING TEMP | MICROAMPERES 70.0 |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | DC SINGLE SECTION 20.0 |
| CRTP | TOLERANCE RANGE PER SECTION | PERCENT SINGLE SECTION -10.00 TO 10.00 |
| CWNJ | CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 6.0000 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-C-39003 TO 1 |
| CQJJ | NONDERATED OPERATING TEMP | CELSIUS MINIMUM -55.0 AND CELSIUS MAXIMUM 85.0 |
| AAQL | BODY STYLE | |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 1.0000 |
| AECE | ANODE TYPE | SOLID |
| CWQH | DC LEAKAGE AT REFERENCE TEMP | MICROAMPERES 7.000 |
| AECQ | ELECTRICAL POLARIZATION | POLARIZED |
| CBBL | FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| CQBQ | CAPACITANCE VALUE PER SECTION | MICROFARADS SINGLE SECTION 33.000 |
| TTQY | TERMINAL TYPE AND QUANTITY | UNINSULATED WIRE LEAD 2 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.686 |
| AEBT | TERMINAL DIAMETER | INCHES NOMINAL 0.025 |