NSN 3040-01-113-4587 · NIIN 011134587 · FSC 3040
NO DASHES 3040011134587
In Stock
WORM SHAFT
Miscellaneous Power Transmission Equipment
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 6.891 |
| CFFB | WORM THREAD QUANTITY | 1 |
| CFFC | WORM THREAD LEAD | INCHES NOMINAL 0.393 |
| CFFD | WORM THREAD DIRECTION | RIGHT-HAND |
| CFFF | WORM PRESSURE ANGLE IN DEG | 14.500 |
| CFFG | WORM HELIX ANGLE | 5 DEG 43 MIN |
| CFFK | WORM OUTSIDE DIAMETER | INCHES NOMINAL 1.500 |
| CFFL | WORM PITCH DIAMETER | INCHES NOMINAL 1.250 |
| CFFN | WORM THREAD SECTION LENGTH | INCHES NOMINAL 2.016 |
| CFFP | WORM BODY LENGTH | INCHES NOMINAL 2.016 |
| CFFW | SHAFT LOCATION | BOTH ENDS OF WORM |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END FIRST PORTION INCHES NOMINAL 0.750 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END THIRD PORTION INCHES NOMINAL 0.438 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FIRST PORTION INCHES NOMINAL 0.750 |
| CFFX | STRAIGHT UNTHREADED LENGTH | FIRST END SECOND PORTION INCHES NOMINAL 0.062 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END FOURTH PORTION INCHES NOMINAL 2.313 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END THIRD PORTION INCHES NOMINAL 0.500 |
| CFFX | STRAIGHT UNTHREADED LENGTH | SECOND END SECOND PORTION INCHES NOMINAL 0.062 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FIRST PORTION INCHES NOMINAL 0.930 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END SECOND PORTION INCHES NOMINAL 0.616 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END FOURTH PORTION INCHES NOMINAL 0.624 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END THIRD PORTION INCHES NOMINAL 0.626 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END FIRST PORTION INCHES NOMINAL 0.930 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | SECOND END SECOND PORTION INCHES NOMINAL 0.616 |
| CFFY | STRAIGHT UNTHREADED SECTION DIAMETER | FIRST END THIRD PORTION INCHES NOMINAL 0.626 |
| CFFZ | UNTHREADED SECTION KEYWAY WIDTH | SECOND END FOURTH PORTION INCHES NOMINAL 0.1880 |
| CFGB | UNTHREADED SECTION KEYWAY DEPTH | SECOND END FOURTH PORTION INCHES NOMINAL 0.094 |
| CFGC | UNTHREADED SECTION PIN HOLE DIAMETER | SECOND END FOURTH PORTION INCHES NOMINAL 1.2500 |
| MATT | MATERIAL | STEEL |