NSN 3130-01-310-2408 · NIIN 013102408 · FSC 3130
NO DASHES 3130013102408
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.1875 |
| ABXV | BORE DIAMETER | INCHES MAXIMUM 0.7495 |
| ACYB | BASE THICKNESS | INCHES NOMINAL 0.3125 |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | INCHES MINIMUM 2.3650 AND INCHES MAXIMUM 2.3850 |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | INCHES MINIMUM 3.4900 AND INCHES MAXIMUM 3.5100 |
| AFWC | HOUSING HEIGHT | INCHES NOMINAL 1.7500 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 4.5000 |
| AFWE | HOUSING WIDTH | INCHES NOMINAL 2.7500 |
| AGKL | LUBRICATION FITTING TYPE | WICK |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | INCHES MINIMUM 0.9340 AND INCHES MAXIMUM 0.9400 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | STRAIGHT SLEEVE |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MATT | MATERIAL | SEAL STEEL CORROSION RESISTING |
| MATT | MATERIAL | HOUSING ALUMINUM ALLOY 6061 |
| MATT | MATERIAL | BEARING STEEL CORROSION RESISTING |
| SFTT | SURFACE TREATMENT | BEARING CHROMIUM |