NSN 5305-01-468-9141 · NIIN 014689141 · FSC 5305
NO DASHES 5305014689141
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: USED ON FIGHTER AIRCRAFT (F18-E/F)
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.312 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.282 AND INCHES MAXIMUM 1.312 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.438 AND INCHES MAXIMUM 0.445 |
| AAUH | SPLINE MINOR DIAMETER | INCHES NOMINAL 0.1570 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.1600 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.312 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | USED ON FIGHTER AIRCRAFT (F18-E/F) |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.312 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.000 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS-SPECIAL THREAD LENGTH, PH13-8MO (125 KSI SHEAR) |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |