NSN 5305-01-514-3443 · NIIN 015143443 · FSC 5305
NO DASHES 5305015143443
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F-18 AIRCRAFT
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.375 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.375 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.550 AND INCHES MAXIMUM 0.560 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES NOMINAL 0.221 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.374 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES NOMINAL 0.106 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F-18 AIRCRAFT |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.375 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 1.000 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES NOMINAL 1.260 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEARD, GEAR DRIVE RECESS-SPECIAL THREAD LENGTH, INCONEL 718 (125 KSI SHEAR) |
| FEAT | SPECIAL FEATURES | REDEFINED HEAD GEOMETRY |
| MATT | MATERIAL | OVERALL NICKEL ALLOY 718 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 014771268. An older drawing citing one of those numbers resolves here.