NSN 5305-01-462-2729 · NIIN 014622729 · FSC 5305
NO DASHES 5305014622729
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: USED ON FA-18 E&F
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.425 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.785 AND INCHES MAXIMUM 0.815 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.497 AND INCHES MAXIMUM 0.507 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.110 |
| AAUH | SPLINE MINOR DIAMETER | INCHES MINIMUM 0.157 AND INCHES MAXIMUM 0.160 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.220 AND INCHES MAXIMUM 0.223 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | USED ON FA-18 E&F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.375 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 160000 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE TENSION HEAD,GEAR DRIVE RECESS |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |