NSN 5305-01-485-5714 · NIIN 014855714 · FSC 5305
NO DASHES 5305014855714
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: PYLON, AIRCRAFT, F/A-18
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.469 |
| AASB | FASTENER LENGTH | INCHES NOMINAL 1.157 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.438 AND INCHES MAXIMUM 0.445 |
| AAUJ | SPLINE MAJOR DIAMETER | INCHES MINIMUM 0.154 AND INCHES MAXIMUM 0.156 |
| AAUR | GRIP DIAMETER | INCHES NOMINAL 0.312 |
| AAVA | POINT DIAMETER | INCHES NOMINAL 0.469 |
| ABQJ | POINT STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | PYLON, AIRCRAFT, F/A-18 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.313 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.688 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 5820 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW,CLOSE TOLERANCE |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| SFTT | SURFACE TREATMENT | OVERALL ALUMINUM |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |