NSN 6105-00-538-9834 · NIIN 005389834 · FSC 6105
NO DASHES 6105005389834
In Stock
MOTOR,CONTROL
Motors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BFMF | COOLING METHOD | NONVENTILATED |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 AND THREADED HOLE(S) 4 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXFH | SPLINE LENGTH | SECOND END INCHES NOMINAL 0.406 |
| ACDC | CURRENT TYPE | INPUT AC |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END SINGLE STYLE A1 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END SINGLE STYLE A14 |
| FAAZ | PHASE | INPUT TWO |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 AND SOLDER LUG 6 |
| BFMK | CONTROL FIELD IMPEDANCE RATING IN OHMS | 640.0 |
| BFML | CONTROL FIELD WINDING TYPE | TWO WINDINGS, SERIES CONNECTED OR TWO WINDINGS, PARALLEL CONNECTED |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 2.25 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 115.0 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 0.625 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 0.406 |
| CWDY | TEMP RATING | OPERATING CELSIUS -54.0 AND OPERATING CELSIUS 120.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 1.250 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 4800.0 |
| AAJT | OVERALL HEIGHT | INCHES 1.750 |
| AAJU | OVERALL LENGTH | INCHES 3.066 |
| AAJV | OVERALL WIDTH | INCHES 1.750 |
| AAUH | SPLINE MINOR DIAMETER | SECOND END INCHES NOMINAL 0.187 |
| ABSA | SPLINE QUANTITY | 15 |
| ABWV | SHAFT DIAMETER | FIRST END INCHES NOMINAL 0.937 |
| ABWV | SHAFT DIAMETER | SECOND END INCHES NOMINAL 0.156 |