NSN 5990-00-896-8930 · NIIN 008968930 · FSC 5990
NO DASHES 5990008968930
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 3194.00 |
| AJSL | BODY SIZE | 11 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 78.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES NOMINAL 17.0 |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 1.000 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 94.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 400.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 707.00 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 876.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 637.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 370.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 602.00 |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CRYY | MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | INCHES 0.112 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES MINIMUM 0.8090 AND INCHES MAXIMUM 0.8150 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AKEJ | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQTM | TERMINAL LOCATION | REAR |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.1200 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.3594 AND INCHES MAXIMUM 0.3906 |
| AHYF | SECURING HOLE QUANTITY | 4 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0310 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 324.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.9984 AND INCHES MAXIMUM 2.0306 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.6400 |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 15.0 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | CENTIMETER-GRAMS NOMINAL 3.0 |
| AJWQ | PILOT LENGTH | INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9995 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 4580.00 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.9700 AND INCHES MAXIMUM 0.9750 |
| AAQL | BODY STYLE | |
| ABRY | LENGTH | SHOULDER INCHES MINIMUM 0.0590 AND INCHES MAXIMUM 0.0650 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0500 |