NSN 5306-01-295-5721 · NIIN 012955721 · FSC 5306
NO DASHES 5306012955721
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 1.476 AND INCHES MAXIMUM 1.526 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.611 AND INCHES MAXIMUM 3.641 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.913 AND INCHES MAXIMUM 0.933 |
| AATB | WIDTH BETWEEN FLATS | INCHES NOMINAL 1.064 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.615 AND INCHES MAXIMUM 1.625 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.212 AND INCHES MAXIMUM 0.232 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.9990 AND INCHES MAXIMUM 0.9995 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.141 AND INCHES MAXIMUM 0.146 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 1.000 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 2.115 AND INCHES MAXIMUM 2.135 |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.222 AND INCHES MAXIMUM 3.262 |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |