NSN 5905-00-011-3744 · NIIN 000113744 · FSC 5905
NO DASHES 5905000113744
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 345.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.25 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.20 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 3600.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 5.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.8750 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.438 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.7810 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.875 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.000 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.375 |