NSN 5990-00-276-8650 · NIIN 002768650 · FSC 5990
NO DASHES 5990002768650
In Stock
SYNCHRO,CONTROL TRANSFORMER
Synchros and Resolvers
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.3116 AND INCHES MAXIMUM 1.3120 |
| AAQL | BODY STYLE | |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.4320 AND INCHES MAXIMUM 1.4370 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.3120 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.1320 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 10.0 |
| AJSL | BODY SIZE | 15 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 90.0 |
| AJSP | STATOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 10.0 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | MILLIWATTS NOMINAL 140.0 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES NOMINAL 0.1250 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.735 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 1.1000 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1867 AND INCHES MAXIMUM 0.1872 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES MINIMUM 0.5450 AND INCHES MAXIMUM 0.5650 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 60.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MAXIMUM 0.050 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 15 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 5.500 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 32.00 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.7720 |
| CQTM | TERMINAL LOCATION | REAR |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0250 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0200 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTJ | ZSO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 7800.00 AND MAXIMUM 9512.00 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| AJTL | ZRS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 1050.00 AND MAXIMUM 1300.00 |
| AJTM | ZRS IMPEDANCE ANGLE IN DEG | MINIMUM 26.00 AND MAXIMUM 33.00 |
| AJTK | ZSO IMPEDANCE ANGLE IN DEG | MINIMUM 77.80 AND MAXIMUM 84.50 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.8745 AND INCHES MAXIMUM 0.8750 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3120 |