NSN 5306-01-313-9169 · NIIN 013139169 · FSC 5306
NO DASHES 5306013139169
In Stock
BOLT,SHEAR
Bolts
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.837 AND INCHES MAXIMUM 0.887 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 2.409 AND INCHES MAXIMUM 2.439 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.515 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 1.037 AND INCHES MAXIMUM 1.047 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.071 AND INCHES MAXIMUM 0.091 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.5605 AND INCHES MAXIMUM 0.5615 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.610 AND INCHES MAXIMUM 0.625 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.562 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.552 AND INCHES MAXIMUM 1.572 |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 180000 |
| CQFM | HARDNESS RATING | OVERALL ROCKWELL C MINIMUM 39.0 AND ROCKWELL C MAXIMUM 43.0 |
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CSYM | SURFACE FINISH | BEARING SURFACE OF HEAD MICROINCHES 32.0 |
| MATT | MATERIAL | OVERALL STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 |
| SFTT | SURFACE TREATMENT | OVERALL CADMIUM AND CHROMATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--416 TY2 CL3 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
Supersedes
This item replaces cancelled NIIN 009585420. An older drawing citing one of those numbers resolves here.