NSN 6625-00-555-3095 · NIIN 005553095 · FSC 6625
NO DASHES 6625005553095
In Stock
VOLTMETER
Electrical and Electronic Properties Measuring and Testing Instruments
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ANRL | MOUNTING ARRANGEMENT STYLE | |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SCREW 3 AND UNTHREADED HOLE(S) 3 |
| BHDC | SCALE GRADUATION TYPE | SINGLE INDICATOR SINGLE RANGE LINEAR |
| ANTG | SENSITIVITY RATING | OHMS PER VOLT 1000.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL---10304 TO 5 |
| ZZZV | FSC APPLICATION DATA | TEST SET,ELECT. EQUIP. |
| AQEC | MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| ASSS | POINTER COLOR | SINGLE INDICATOR SINGLE RANGE BLACK |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.695 |
| AFFL | MOUNTING BOLT CIRCLE DIAMETER | INCHES NOMINAL 2.440 |
| AMKD | INDICATOR TYPE | DIAL W/POINTER |
| CTQL | MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| CTTD | CIRCUIT ATTACHMENT METHOD AND QUANTITY | SOLDER LUG 2 AND THREADED STUD 2 |
| MATT | MATERIAL | STEEL |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---10304 |
| AMQY | INSTALLATION DESIGN | PANEL |
| APSW | METER BODY DIAMETER BEHIND MOUNTING FLANGE | INCHES MAXIMUM 2.210 |
| APMM | DIAL SCALE MARKING COLOR | SINGLE INDICATOR SINGLE RANGE WHITE |
| APPN | ACCURACY IN PERCENT | SINGLE INDICATOR SINGLE RANGE AT FULL SCALE -2.0 TO 2.0 |
| APST | METER DEPTH BEHIND MOUNTING FLANGE | INCHES MAXIMUM 1.600 |
| SFTT | SURFACE TREATMENT | PAINT |
| STYL | STYLE DESIGNATOR | |
| BHMW | MEASUREMENT RANGE | SINGLE INDICATOR SINGLE RANGE VOLTS, DC 0.0 TO 50.0 |
| AACT | CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.650 |
| NHCF | NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| ABWG | SCALE DIVISION QUANTITY | 50 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.125 |
Supersedes
This item replaces cancelled NIIN 008329078. An older drawing citing one of those numbers resolves here.