NSN 5990-00-905-1185 · NIIN 009051185 · FSC 5990
NO DASHES 5990009051185
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| AJVC | COMPENSATOR DC RESISTANCE IN OHMS | NOMINAL 390.00 |
| AJVD | COMPENSATOR TRANSFORMATION RATIO IN PERCENT | ROTOR TO COMPENSATOR MINIMUM 1.005 AND ROTOR TO COMPENSATOR MAXIMUM 1.020 |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 1.010 |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJSY | ZSO RESISTANCE IN OHMS | NOMINAL 340.00 |
| AJTA | ZRS RESISTANCE IN OHMS | NOMINAL 650.00 |
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 350.00 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 295.00 |
| AJTX | COMPENSATION METHOD | WINDING COMPENSATED |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2120 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJSL | BODY SIZE | 8 |
| AJVF | PHASE SHIFT ANGLE IN DEG | OUTPUT TO INPUT NOMINAL 17.000 |
| AAQL | BODY STYLE | |
| CQTM | TERMINAL LOCATION | REAR |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | NOMINAL 930.00 |
| CRKL | PLUS J ZRS REACTANCE IN OHMS | NOMINAL 180.00 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6870 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.0895 AND INCHES MAXIMUM 0.0900 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 10 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.4995 AND INCHES MAXIMUM 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.5280 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7600 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.10 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.3160 |