NSN 5990-00-901-2574 · NIIN 009012574 · FSC 5990
NO DASHES 5990009012574
In Stock
RESOLVER,ELECTRICAL
Synchros and Resolvers
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 20.00 |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.0620 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.9750 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0930 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.3870 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 1.0590 AND INCHES MAXIMUM 1.0620 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 1.8570 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 8 |
| AJSW | ZRO RESISTANCE IN OHMS | NOMINAL 30.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 7.000 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.5300 |
| AJSL | BODY SIZE | 11 |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | NOMINAL 175.00 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND |
| CRSY | ALIGNMENT HOLE DEPTH | INCHES MAXIMUM 0.0780 |
| CQTM | TERMINAL LOCATION | REAR |
| MATT | MATERIAL | BODY STEEL CORROSION RESISTING |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.1870 AND INCHES MAXIMUM 0.1872 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AAQL | BODY STYLE | |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 0.9970 AND INCHES MAXIMUM 1.0000 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6245 AND INCHES MAXIMUM 0.6250 |
| AJVW | ALIGNMENT HOLE QUANTITY | 4 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -3.0 TO 3.0 |
| CTCW | ALIGNMENT HOLE BOLT CIRCLE DIAMETER | INCHES NOMINAL 0.8120 |
| CSJY | TRANSFORMATION RATIO | STATOR TO ROTOR NOMINAL 0.454 |