NSN 5306-01-084-1147 · NIIN 010841147 · FSC 5306
NO DASHES 5306010841147
In Stock
BOLT,SHOULDER
Bolts
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.742 AND INCHES MAXIMUM 0.792 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 3.252 AND INCHES MAXIMUM 3.282 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.494 AND INCHES MAXIMUM 0.514 |
| AATB | WIDTH BETWEEN FLATS | INCHES MINIMUM 0.553 AND INCHES MAXIMUM 0.564 |
| AATC | EXTENDED WASHER DIAMETER | INCHES MINIMUM 0.818 AND INCHES MAXIMUM 0.828 |
| AATD | EXTENDED WASHER THICKNESS | INCHES MINIMUM 0.113 AND INCHES MAXIMUM 0.133 |
| AATN | SHOULDER DIAMETER | FIRST SHOULDER INCHES MINIMUM 0.5302 AND INCHES MAXIMUM 0.5307 |
| AATX | SHOULDER LENGTH | FIRST SHOULDER INCHES MINIMUM 2.490 AND INCHES MAXIMUM 2.510 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FIRST HOLE INCHES MINIMUM 0.106 AND INCHES MAXIMUM 0.111 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.500 |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | POUNDS PER SQUARE INCH 220000 |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FIRST HOLE INCHES MINIMUM 3.006 AND INCHES MAXIMUM 3.046 |
| CWYB | SHOULDER SHAPE | FIRST SHOULDER ROUND |
| MATT | MATERIAL | OVERALL STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL MFR REF SINGLE MATERIAL RESPONSE 23-112 TYE A FSC- 76301 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |