NSN 5990-00-881-6072 · NIIN 008816072 · FSC 5990
NO DASHES 5990008816072
In Stock
SYNCHRO,RECEIVER
Synchros and Resolvers
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJTS | ROTOR DC RESISTANCE IN OHMS | NOMINAL 34.00 |
| AJSL | BODY SIZE | 8 |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | INCH-OUNCES NOMINAL 0.02 |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | OUNCES 8.0 |
| FEAT | SPECIAL FEATURES | SHAFT RADIAL PLAY TEST POINT 0.125 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AAQL | BODY STYLE | |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJTT | STATOR DC RESISTANCE IN OHMS | NOMINAL 10.00 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 26.0 |
| CQTM | TERMINAL LOCATION | REAR |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5000 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.6025 |
| ABKK | FLANGE DIAMETER | INCHES NOMINAL 0.7500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.6910 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES NOMINAL 0.0750 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.3125 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT ROUND, SLOTTED |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | OUNCES 4.0 |
| AJWH | SHAFT END PLAY | INCHES MAXIMUM 0.0040 |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 150.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS MAXIMUM 1.0 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES MAXIMUM 1.2900 |
| CRHN | SHAFT SLOT WIDTH | SINGLE SHAFT INCHES NOMINAL 0.0320 |
| AJXB | SHAFT MAXIMUM RUNOUT | INCHES 0.0010 |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | INCHES 0.0008 |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQZS | SHAFT SLOT DEPTH | SINGLE SHAFT INCHES NOMINAL 0.0300 |