NSN 6105-00-548-1589 · NIIN 005481589 · FSC 6105
NO DASHES 6105005481589
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CNMM | FRAME SIZE DESIGNATION | 224 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 2.0000 |
| AAJU | OVERALL LENGTH | INCHES 19.437 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 230.0 |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 6.750 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.2500 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AAJT | OVERALL HEIGHT | INCHES 14.218 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A9 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-15 DEG |
| AXCP | WINDING TYPE | SHUNT WOUND W/COMMUTATING POLES-STABILIZING WINDINGS |
| AAJV | OVERALL WIDTH | INCHES 14.500 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---2511 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1750.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 3.187 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 5.500 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 9.000 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 7.770 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 1.0000 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.1250 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 40.0 AND OPERATING CELSIUS 50.0 |
Supersedes
This item replaces cancelled NIIN 006359571. An older drawing citing one of those numbers resolves here.