NSN 5305-01-703-4071 · NIIN 017034071 · FSC 5305
NO DASHES 5305017034071
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: EA-18G GROWLER
Technical characteristics
25 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.635 |
| ABQJ | POINT STYLE | |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.115 AND INCHES MAXIMUM 1.135 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.531 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.641 AND INCHES MAXIMUM 1.671 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD ST3-454 |
| ABQZ | INTERNAL DRIVE STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| CWDK | POINT CHAMFER ANGLE | DEGREES NOMINAL 90.0 |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.133 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3115 AND INCHES MAXIMUM 0.3120 |
| AAUY | POINT LENGTH | INCHES NOMINAL 0.052 |
| AGAV | END ITEM IDENTIFICATION | EA-18G GROWLER |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3125 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL INTERNATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S 2700, -ETHOD 1 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| AASK | HEAD STYLE | |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW - CLOSE TOLERANCE, 100 DEGREE C'SUNK, HI-TORQUE, CRES (125 KSI FSU) |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |