NSN 5305-01-716-4381 · NIIN 017164381 · FSC 5305
NO DASHES 5305017164381
In Stock
SCREW,CLOSE TOLERANCE
Screws
Application: F/A-18A THRU D AIRCRAFT
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.160 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.3740 AND INCHES MAXIMUM 0.3745 |
| AAWU | SINGLE SHEAR STRENGTH | POUNDS PER SQUARE INCH (PSI) 125000 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AGAV | END ITEM IDENTIFICATION | F/A-18A THRU D AIRCRAFT |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.3750 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 1.115 AND INCHES MAXIMUM 1.135 |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.0 AND DEGREES MAXIMUM 101.0 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.752 AND INCHES MAXIMUM 0.762 |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.641 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.751 AND INCHES MAXIMUM 1.781 |
| ZZZK | SPECIFICATION/STANDARD DATA | MANUFACTURERS STANDARD 76301-ST3-454 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL AEROSPACE MATERIAL SPEC STD SINGLE MATERIAL RESPONSE H13-8-O ER A-S5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE A-S2700,-ETHOD 1 OR 2 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SCREW-CLOSE TOLERANCE,100 DEGREE C'SUNK,HI-TORQUE,CRES(125 KSI FSU) |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |