NSN 5306-01-477-5786 · NIIN 014775786 · FSC 5306
NO DASHES 5306014775786
In Stock
BOLT,CLOSE TOLERANCE
Bolts
Application: F18 E/F
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES NOMINAL 0.276 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.8285 AND INCHES MAXIMUM 0.8485 |
| AASK | HEAD STYLE | |
| AASU | HEAD HEIGHT | INCHES NOMINAL 0.140 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.359 AND INCHES MAXIMUM 0.380 |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | FASTENER INCHES MINIMUM 0.070 AND INCHES MAXIMUM 0.075 |
| AAZH | HEAD MINOR DIAMETER | INCHES MINIMUM 0.383 AND INCHES MAXIMUM 0.389 |
| AGAV | END ITEM IDENTIFICATION | F18 E/F |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.190 |
| ANEE | GRIP LENGTH | INCHES NOMINAL 0.563 |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | FASTENER INCHES MINIMUM 0.966 AND INCHES MAXIMUM 0.986 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT-CLOSE TOLERANCE,SPLINE DRIVE,CRES (125 KSI FSU) DRILLED, SHORT THREAD |
| MATT | MATERIAL | OVERALL STEEL COMP XM-13 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE A-S 5629 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |