NSN 5305-00-283-7455 · NIIN 002837455 · FSC 5305
NO DASHES 5305002837455
In Stock
SCREW,CLOSE TOLERANCE
Screws
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSYM | SURFACE FINISH | GRIP MICROINCHES 32.0 |
| CRSQ | COUNTERSINK ANGLE | DEGREES MINIMUM 99.5 AND DEGREES MAXIMUM 100.5 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| ANEE | GRIP LENGTH | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 0.952 AND INCHES MAXIMUM 0.999 |
| AASK | HEAD STYLE | |
| ABQZ | INTERNAL DRIVE STYLE | |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.071 AND INCHES MAXIMUM 0.073 |
| AAUR | GRIP DIAMETER | INCHES MINIMUM 0.2490 AND INCHES MAXIMUM 0.2495 |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.442 AND INCHES MAXIMUM 0.509 |
| CSYM | SURFACE FINISH | THREADS MICROINCHES 32.0 |
| FEAT | SPECIAL FEATURES | FURNISHED WITH ONE O-RING SEAL |
| MATT | MATERIAL | OVERALL TITANIUM ALLOY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE NAS621 CO- 6AL-4V OR ASSN STD SINGLE MATERIAL RESPONSE A-S4928 |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.502 AND INCHES MAXIMUM 0.507 |