NSN 5990-00-070-8522 · NIIN 000708522 · FSC 5990
NO DASHES 5990000708522
In Stock
SYNCHRO,TRANSMITTER
Synchros and Resolvers
Technical characteristics
45 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKAN | SHAFT THREAD CLASS | 2A |
| CQRG | BODY MATERIAL | STEEL CORROSION RESISTING |
| CQTM | TERMINAL LOCATION | REAR |
| AJTH | ZRO IMPEDANCE ANGLE IN DEG | MINIMUM 84.00 AND MAXIMUM 87.50 |
| AJTN | ZSS IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 21.60 AND MAXIMUM 26.00 |
| AAQL | BODY STYLE | |
| ABRY | LENGTH | SHOULDER INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE SHAFT INCHES MINIMUM 0.2403 AND INCHES MAXIMUM 0.2405 |
| ABXF | SHAFT LENGTH | SINGLE SHAFT INCHES NOMINAL 0.7190 |
| AJYY | SHAFT THREAD SERIES DESIGNATOR | SINGLE SHAFT UNF |
| AKAF | SHAFT THREAD DIRECTION | SINGLE SHAFT RIGHT-HAND |
| AJST | ROTOR INPUT CURRENT RATING | MILLIAMPERES MAXIMUM 245.0 |
| AJVV | TORQUE GRADIENT PER ANGULAR DEG | INCH-OUNCES MAXIMUM 0.200 |
| AJWQ | PILOT LENGTH | INCHES NOMINAL 0.0430 |
| AJWV | AFT OF FIRST FLANGE DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | INCHES NOMINAL 4.2990 |
| AJXA | SPLINE TOOTH DIAMETRAL PITCH | 96 |
| AJTP | ZSS IMPEDANCE ANGLE IN DEG | MINIMUM 42.00 AND MAXIMUM 47.00 |
| AJVF | PHASE SHIFT ANGLE IN DEG | INPUT TO OUTPUT NOMINAL 1.000 |
| AJVG | MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | OUTPUT 32.00 |
| AAZX | SECOND SHOULDER LENGTH | INCHES NOMINAL 0.1700 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.2990 |
| ABKK | FLANGE DIAMETER | INCHES MINIMUM 2.2490 AND INCHES MAXIMUM 2.2500 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.2500 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.9900 |
| CQWQ | SHAFT THREAD LENGTH | SINGLE SHAFT INCHES NOMINAL 0.2900 |
| CRSJ | SHAFT TYPE | SINGLE SHAFT SPLINE W/THREADS |
| CSJY | TRANSFORMATION RATIO | ROTOR TO STATOR NOMINAL 0.783 |
| CWBH | SHAFT NOMINAL THREAD SIZE | SINGLE SHAFT INCHES 0.250 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-S-20708 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 5 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-S-20708 TO 45 |
| AJSR | ROTOR INPUT VOLTAGE RATING IN VOLTS | NOMINAL 115.0 |
| AJSS | FREQUENCY IN HERTZ | NOMINAL 400.0 |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 48.00 |
| AJVL | ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -6.0 TO 6.0 |
| AJVM | SPLINE TOOTH QUANTITY | 22 |
| AJSL | BODY SIZE | 23 |
| AJTG | ZRO IMPEDANCE MAGNITUDE IN OHMS | MINIMUM 470.00 AND MAXIMUM 580.00 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AHCG | MAXIMUM TEMP RISE | CELSIUS 20.0 |
| AJSV | ROTOR INPUT ELECTRICAL POWER RATING | WATTS NOMINAL 1.7 |
| AAVH | SHOULDER DIAMETER | INCHES MINIMUM 1.9850 AND INCHES MAXIMUM 1.9900 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.5950 |
| AAZW | SECOND SHOULDER DIAMETER | INCHES MINIMUM 1.9985 AND INCHES MAXIMUM 1.9995 |
Supersedes
This item replaces cancelled NIINs 005197891 · 005839212 · 006364124 · 009057395 · 010660461 · 011350924. An older drawing citing one of those numbers resolves here.